Zhejiang Matech Industry Company Limited

TEL: +86-571-28350111
Categories
Contact Us
Hangzhou Matech Steel Company Limited
Tel: +86-571-28350111
Fax: +86-571-86693517
Email: sales@matech-steel.com
Add: Floor 10, Xixi Vally E-Building, Xihu District, Hangzhou, Zhejiang province, China
Steel Pipes for High Pressure Service

Steel Pipes for High Pressure Service

Seamless Pipes and Tubes for Pressure Applications DIN 1629 applications the overheated boilers, as minimum thickness ferrite and seamless steel pipes, and as heat exchangers via austenitic pipes. THE EN 10216 COMPRISES SEVERAL PARTS. THE PARTS THAT ARE RELEVANT TO US ARE AS FOLLOWS: · EN 10216...

Seamless Pipes and Tubes for Pressure Applications

DIN 1629 applications the overheated boilers, as minimum thickness ferrite and seamless steel pipes, and as heat exchangers via austenitic pipes.

THE EN 10216 COMPRISES SEVERAL PARTS. THE PARTS THAT ARE RELEVANT TO US ARE AS FOLLOWS:

· EN 10216 Part 1: non-alloy pipes with specified properties at room temperature

· EN 10216 Part 2: non-alloy pipes with specified properties at higher temperatures

· EN 10216 Part 3: alloy pipes made from fine-grained steel for any temperature

图片2.png

+ EN 10216 non alloy steel tubes

This part of EN10216 may also be applied for tubes of non-circular cross section; necessary modification should be agreed a time of enquiry and order.

Some examples:

EN 10216-1, QUALITY P235TR2 (FORMERLY DIN 1629, ST.37.0)

· P = Pressure

· 235 = minimum yield strength in N/mm2

· TR2 = quality with specified properties relating to aluminum content, impact values and inspection and test requirements. (In contrast to TR1, for which this is not specified).

EN 10216-2, QUALITY P235 GH (FORMERLY DIN 17175, ST.35.8 CL. 1, BOILER PIPE)

· P = Pressure

· 235 = minimum yield strength in N/mm2

· GH = tested properties at higher temperatures

EN 10216-3, QUALITY P355 N (MORE OR LESS EQUIVALENT TO DIN 1629, ST.52.0)

· P = Pressure

· 355 = minimum yield strength in N/mm2

· N = normalized*

* Normalized is defined as: normalized (warm) rolled or standard annealing (at a min temperature of 930°C). This applies to allqualities designated by the letter ‘N’ in the new Euro Standards.

Pipes: the following standards are replaced by DIN EN

PIPES FOR PRESSURE APPLICATIONS OLD STANDARD

Execution

Norm

Steel grade

Welded

DIN 1626

St.37.0

Welded

DIN 1626

St.52.2

Seamless

DIN 1629

St.37.0

Seamless

DIN 1629

St.52.2

Seamless

DIN 17175

St.35.8/1

Seamless

ASTM A106*

Grade B

Seamless

ASTM A333*

Grade 6

PIPES FOR PRESSURE APPLICATIONS NEW STANDARD

Execution

Norm

Steel grade

Welded

DIN EN 10217-1

P235TR2

Welded

DIN EN 10217-3

P355N

Seamless

DIN EN 10216-1

P235TR2

Seamless

DIN EN 10216-3

P355N

Seamless

DIN EN 10216-2

P235GH

Seamless

DIN EN 10216-2

P265GH

Seamless

DIN EN 10216-4

P265NL

* ASTM standards will remain valid and will not be replaced by Euronorms in the near future

Welcome to order more.

Hot Tags: steel pipes for high pressure service, China, manufacturers, suppliers, factory, wholesale
Related Products
  • Contact Us
    Hangzhou Matech Steel Company Limited
    Tel: +86-571-28350111
    Fax: +86-571-86693517
    Email: sales@matech-steel.com
    Add: Floor 10, Xixi Vally E-Building, Xihu District, Hangzhou, Zhejiang province, China
  • Categories
  • Copyright © Hangzhou Matech Steel Company Limited All Rights Reserved.