Zhejiang Matech Industry Company Limited

TEL: +86-571-28350111
Categories
Contact Us
Hangzhou Matech Steel Company Limited
Tel: +86-571-28350111
Fax: +86-571-86693517
Email: sales@matech-steel.com
Add: Floor 10, Xixi Vally E-Building, Xihu District, Hangzhou, Zhejiang province, China
ASTM A556 Steel Tubes

ASTM A556 Steel Tubes

ASTM A556 Superheater Steel Tube ASTM A556 / A556M – 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes · ASTM A 556 ]M - 88 / ASME 556 /ASTMA556M-88/ASME556 · Cold Drawn Seamless Carbon Steel Tube ASTM A179 · Cold drawn seamless steel tube process ASTM...

ASTM A556 Superheater Steel Tube

ASTM A556 / A556M – 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

· ASTM A 556 ]M - 88 / ASME 556 /ASTMA556M-88/ASME556

· Cold Drawn Seamless Carbon Steel Tube ASTM A179

· Cold drawn seamless steel tube process

ASTM A556 is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

图片13.png

Scope

1.1 This specification2 covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes, if specified, for use in tubular feedwater heaters.

1.2 The tubing sizes covered shall be 5/8 to 11/4-in. [15.9 to 31.8-mm] outside diameter, inclusive, with minimum wall thicknesses equal to or greater than 0.045 in. [1.1 mm].

1.3 Optional supplementary requirements are provided, and when desired, shall be stated in the order.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

· Related Standard: ASTM A556, ASME SA556

· Related Material: SA556Gr.B2, SA556Gr.C2

Descripition:

· Outside Diameter: 12-40mm

· Wall Thickness: 1-4mm

· Length: max length 27 meters

Method: Cold Drawn
Delivery Condition: NBK, Bright, U bending.

Chemistry Composition

Grade

C %

Si %

Mn %

P %

S %

B2

0.27 max

0.10 min

0.29-0.93

0.030 max

0.030 max

C2

0.30 max

0.10 min

0.29-1.06

0.030 max

0.030 max

Mechanical Properties

Grade

Tensile Strength MPa

Yield Strength MPa

Hardness HRB

B2

410 min

260 min

79 min

C2

480 min

280 min

89 min

Tolerances

Tolerances according to specification or according to agreement. Standard tolerances are:

Hot finished

OD +/- 1%

WT +/-12.5%

Cold finished

OD +/-0.75%

WT +/-10%

Hot Tags: ASTM A556 steel tubes, China, manufacturers, suppliers, factory, wholesale
Related Products
  • Contact Us
    Hangzhou Matech Steel Company Limited
    Tel: +86-571-28350111
    Fax: +86-571-86693517
    Email: sales@matech-steel.com
    Add: Floor 10, Xixi Vally E-Building, Xihu District, Hangzhou, Zhejiang province, China
  • Categories
  • Copyright © Hangzhou Matech Steel Company Limited All Rights Reserved.